UB2000 Brass Ultrasonic Proximity Sensor For Distance Measurement 200G IP67 AIA-1 manufacturer from China YUEQING WINSTON ELECTRIC CO.,LTD.

UB2000 Brass Ultrasonic Proximity Sensor For Distance Measurement 200G IP67

Place of Origin:

Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: AIA-1

UB2000 Brass Ultrasonic Proximity Sensor For Distance Measurement 200G IP67

<spa

UB2000 Brass Ultrasonic Proximity Sensor For Distance Measurement 200G IP67

Description

Ultrasonic sensors present the ideal solution for non-contact position and distance measurement in all industrial areas where environmental conditions such as dust, smoke or steam may affect the sensors. Objects consisting of a variety of materials can be detected to within millimeters regardless of color or shape.

Technical data

General Specifications
Sensing distance	100…2000mm
Adjustment range	100…2000mm
Unusable area	0…100mm
Standard target plate	100mm×100mm
Transducer frequency	About 112kHz
Response delay	About 195ms
Indicators/Operating means
LED blue	Power on
LED yellow	indication of the switching state Flashing:program function object detected
LED red	permanently red: Error Red,flashing:program function,object not detected
Electrical specifications
Operating voltage UB	10…30VDC,ripple10%ss
Power consumption P0	≤900 mW
Output
Output type	1 analogue output 0…10V
Resolution	evaluation range [mm]/4000, but ≥ 0.35 mm
Deviation of the characteristic curve	≤0.2% of full-scale value
Repeat accuracy	≤0.1% of full-scale value
Load impedance	0…500 Ohm
Temperature influence	≤2% from full-scale value
Ambient conditions
Ambient temperature	-25…70
Storage temperature	-40…85
Mechanical specifications
Connection	Connector M12x1,4-PIN
Material Housing	brass,nickel-plated
Transducer	epoxy resin/hollow glass sphere mixture; Polyurethane foam

External synchronization

The sensor can be synchronised by the external application of a square wave voltage. A synchronisation pulse at the
synchronisation
input starts a measuring cycle. The pulse must have a duration greater than 100 μs. The measuring cycle starts with
the falling edge of a synchronisation pulse. A low level > 1 s or an open synchronisation input will result in the normal
operation
of the sensor. A high level at the synchronisation input disables the sensor. Two operating modes are available:
1. Multiple sensors can be controlled by the same synchronisation signal. The sensors are synchronised.
2. The synchronisation pulses are sent cyclically to individual sensors. The sensors operate in multiplex