Brass / Nickel-Plated Ultrasonic Proximity Sensor Industrial UB800 Series 25g AIA-1 manufacturer from China YUEQING WINSTON ELECTRIC CO.,LTD.

Brass / Nickel-Plated Ultrasonic Proximity Sensor Industrial UB800 Series 25g

Place of Origin:

Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: AIA-1

Brass / Nickel-Plated Ultrasonic Proximity Sensor Industrial UB800 Series 25g
<span

Brass / Nickel-Plated Ultrasonic Proximity Sensor Industrial UB800 Series 25g

Description

Ultrasonic sensors present the ideal solution for non-contact position and distance measurement in all industrial areas where environmental conditions such as dust, smoke or steam may affect the sensors. Objects consisting of a variety of materials can be detected to within millimeters regardless of color or shape.

Technical data

General Specifications
Sensing distance	50…800mm
Adjustment range	70…800mm
Unusable area	0…50mm
Standard target plate	100mm×100mm
Transducer frequency	About 255kHz
Response delay	About 100ms
Indicators/Operating means
LED blue	Power on
LED yellow	indication of the switching state Flashing:program function object detected
LED red	permanently red: Error Red,flashing:program function,object not detected
Electrical specifications
Operating voltage UB	10…30VDC,ripple10%ss
No-load supply current	≤20mA
Intput
Input type	1 TEACH-IN input Operating distance A1:-UB…+1V,operating distanceA2:+6… + UB Input impedance:4.7KΩ TEACH-IN programmable pulse :≥1S
Output
Output type	1 switch output E5,PNP NO/NC, programmable
Rated operational current	200mA,short-circuit/overload protected
Default setting	Switching point A1:70mm Switching point A2: 800mm
Voltage drop	≤ 3V
Repeat accuracy	≤ 1%
Switching frequency f	≤ 4 HZ
Range hysteresis H	1% of the set operating distance
Temperature influence	± 1.5% of full-scale value
Ambient conditions
Ambient temperature	-25…70(248...343K)
Storage temperature	-40…85(233...358K)
Mechanical specifications
Connection	V1 connector(M12×1),4-pin
Material Housing	brass,nickel-plated
Transducer	epoxy resin/hollow glass sphere mixture; Polyurethane foam

External synchronization

The sensor can be synchronised by the external application of a square wave voltage. A synchronisation pulse at the
synchronisation
input starts a measuring cycle. The pulse must have a duration greater than 100 μs. The measuring cycle starts with
the falling edge of a synchronisation pulse. A low level > 1 s or an open synchronisation input will result in the normal
operation
of the sensor. A high level at the synchronisation input disables the sensor. Two operating modes are available:
1. Multiple sensors can be controlled by the same synchronisation signal. The sensors are synchronised.
2. The synchronisation pulses are sent cyclically to individual sensors. The sensors operate in multiplex mode.

Internal synchronization

The synchronisation connections of up to 5 sensors capable of internal synchronisation are connected to one another. When
power is applied, these sensors will operate in multiplex mode.
The response delay increases according to the number of sensors to be synchronised. Synchronisation cannot be performed
during TEACH-IN and vice versa. The sensors must be operated in an unsynchronised manner to teach the evaluation limits.

Dimensions